Lead4Pass just published the NEWEST CCNP 300-515 exam dumps! And,
Lead4Pass offer two types of the 300-515 dumps — 300-515 VCE dumps and 300-515 PDF dumps,
both VCE and PDF contain the NEWEST 300-515 exam questions, they will help you pass the CCNP 300-515 exam easily!
Now, get the NEWEST 300-515 dumps in VCE and PDF from Lead4Pass — https://www.leads4pass.com/300-515.html (71 Q&As Dumps)

What’s more, part of that Lead4Pass 300-515 dumps now are free — https://drive.google.com/file/d/1_VtXJYlmlTwwr4hHaswEwuZy-F0oOgwK/view?usp=sharing

Free CCNP 300-515 exam questions and answers

QUESTION 1

Which BGP feature causes to replace the AS number of originating router with the AS number of the sending router?

A. route reflectors
B. route dampening
C. confederations
D. AS override

Correct Answer: D
Reference: https://community.cisco.com/t5/networking-documents/understanding-bgp-as-override-feature/ta-p/3111967

 

QUESTION 2

Refer to the exhibit. Which statement about this output is true?

A. The router IP 192.168.1.2 sent an implicit null, and the output is from the penultimate LSR.
B. The adjacent router is the egress LSR and has mpls ldp explicit-null configured.
C. The adjacent LSR router configured mpls label range 0.
D. The zero in the second column is the normal behavior of an egress router LSR.

Correct Answer: B

 

QUESTION 3

An engineer is investigating an MPLS LDP issue. Which command should an engineer use on a Cisco IOS XE device to
display the contents of the LFIB?

A. show mpls forwarding-table
B. show mpls ldp neighbors
C. show mpls ldp labels
D. show mpls ldp bindings

Correct Answer: A
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mpls/command/mp-cr-book/mp-s2.html

 

QUESTION 4

Refer to the exhibit. What is the effect of this configuration?

A. The mroute table is cleared.
B. Router 1 accepts multicast routes with a tag of 12:1
C. A Cisco MPLS TE tunnel is generated with 192.168.1.2 as the source IP address of router 1.
D. An LSP virtual interface tunnel is created.

Correct Answer: B

 

QUESTION 5

Refer to the exhibit. An engineer is implementing an MPLS P2MP TE solution. Which type of router can serve as the
midpoint router and the tailend router in this P2MP TE network implementation?

A. headend
B. source
C. transit
D. bud

Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/mpls/mp-te-path-setup-xe-3sasr920-book/mp-te-path-setup-xe-3s-asr920-book_chapter_01.html

 

QUESTION 6

The CTO of a company requires the support of a network consultant to deliver an MPLS solution without resigning to a
certain degree of redundancy and scalability. Which solution effectively scales to hundreds or thousands of sites?

A. L2VPN with the broadcast traffic processed at the ingress PE.
B. L3VPN with direct LSP connectivity between all PEs.
C. L2VPN by encapsulating multiple frame formats with interworking.
D. L3VPN using a hierarchical topology of N-PEs and U-PEs.

Correct Answer: D

 

QUESTION 7

Refer to the exhibit. A network engineer has been called to configure the four PE devices in order to enable full
communication among the four CE devices connected to them. While starting to configure, he experienced a
connectivity issue. Which two tasks should the engineer perform in order to begin the process correctly? (Choose two.)

A. Configure PE3 to export route-targets 100:1 and 200:2.
B. Configure PE3 to import route-targets 100:1 and 200:2.
C. Configure PE4 to import route-targets 101:1 and 202:2.
D. Configure PE2 to export route-targets 300:3 and 400:4.
E. Configure PE1 to import route-targets 300:3 and 400:4.

Correct Answer: AB

 

QUESTION 8

What must match in the EVPN and L2VPN configuration mode when configuring EVPN native in a router?

A. interface
B. address family
C. bridge domain
D. EVI

Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-2/lxvpn/configuration/guide/b-l2vpncg-asr9000-62x/b-l2vpn-cg-asr9000-62x_chapter_01011.html

 

QUESTION 9

DRAG DROP

Refer to the exhibit. Drag and drop the EVC configuration items from the left onto the correct descriptions on the right.
Select and Place:

Correct Answer:

 

QUESTION 10

Refer to the exhibit. PE1 and PE2 are exchanging VPNv4 routes for CE1 and CE2, and PE3 contains the default route
to the internet. If the three devices are operating normally, which two conclusions describe this configuration? (Choose
two.)

A. The CE1 and CE2 VRFs can exchange routes only between their respective VRFs on PE1 and PE2.
B. All three routers must be running a distance-vector routing protocol.
C. All three routers must be running MP-BGP.
D. The CE1 and CE2 VRFs can access the default route provided by the Internet VRF.
E. Only the CE2 VRF can access the default route provided by the Internet VRF.

Correct Answer: AC

 

QUESTION 11

DRAG DROP
Drag and drop the EVPN components from the left onto the correct planes on the right.
Select and Place:

Correct Answer:

Reference: https://www.cisco.com/c/dam/m/en_us/network-intelligence/service-provider/digitaltransformation/knowledge-network-webinars/pdfs/0420-epn-ckn.pdf slide 8

 

QUESTION 12

Refer to the exhibit. Which statement about this configuration is true?

A. Router 1 will accept multicast routes with a route-target of 12:1.
B. 192.168.1.2 must be reachable by all routers participating in the mvpn-intranet MVRF.
C. Router 1 has statically defined thresholds for data MDT.
D. The MVRF must be configured on each router on the customer and service provider networks.

Correct Answer: A

 

QUESTION 13

What is the primary function of a VRF on a router?

A. It enables the router to support multiple separate routing tables, which allows the device to handle overlapping IP
addresses.
B. It enables a router to run BGP and a distance vector routing protocol at the same time, which allows it to serve as a
VPN endpoint between remote sites.
C. It enables a router to configure VLANs locally, which provides segregation between networks.
D. It enables the router to provide faster switching through the network by using labels to identify the input and output
interfaces for neighbor routers.

Correct Answer: A

 

QUESTION 14

Refer to the exhibit. While provisioning a new BGP session between the PE and CE router, you issue the as-override
command. Which statement describes modification of the prefix before being sent to the CE router (10.10.10.1)?

A. The fourth AS changes, but no other autonomous systems change.
B. The first and fourth autonomous systems change.
C. The second and third autonomous systems change.
D. The first AS changes, but no other autonomous systems change.

Correct Answer: D

 

QUESTION 15

Which optional information can be included with an IPv6 ping to support the troubleshooting process?

A. IPv4 IP address
B. source MAC address
C. destination MAC address
D. IPv6 hostname

Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6/configuration/xe-3s/ipv6-xe-36s-book/ip6-mngapps.html

Continue to follow to get more free updates…

Learning the Lead4Pass 300-515 dumps with VCE and PDF for 100% passing Developing Applications and Automating Workflows using Cisco Platforms (DEVASC) certification — https://www.leads4pass.com/300-515.html (71 Q&As Dumps)

BONUS!!! Download part of Lead4Pass 300-515 dumps for free — https://drive.google.com/file/d/1_VtXJYlmlTwwr4hHaswEwuZy-F0oOgwK/view?usp=sharing