[2017 PDF free download] Latest Lead4pass 210-065 Dumps Cisco Exam Materials And Youtube Demo Update

Latest lead4pass 210-065 dumps Cisco pdf materials and vce youtube update demo. Prepare for Cisco 210-065 exam with best Cisco CCNA Collaboration 210-065 dumps exam practice questions and answers free update from lead4pass. “Implementing Cisco Video Network Devices v1.0” is the name of Cisco CCNA Collaboration lead4pass https://www.lead4pass.com/210-065.html exam dumps which covers all the knowledge points of the real Cisco exam. High quality Cisco CCNA Collaboration lead4pass 210-065 dumps pdf study guides and training resources update free try, pass Cisco 210-065 exam test easily.

Latest Lead4pass 210-065 dumps pdf materials free download from google drive: https://drive.google.com/open?id=0B_7qiYkH83VRODRqVmVBYWxuc0k

Latest Lead4pass 210-060 dumps pdf materials free download from google drive: https://drive.google.com/open?id=0B_7qiYkH83VRSHJTTV9NMjQ0dmc

Vendor: Cisco
Certifications: CCNA Collaboration
Exam Name: Implementing Cisco Video Network Devices v1.0
Exam Code: 210-065
Total Questions: 281 Q&As
lead4pass 210-065 dumps
The microphone on a Cisco TelePresence System 3000 is switching incorrectly to a camera that does not have an active speaker. What is the first step that an engineer should take to troubleshoot this issue?
A. Check whether the microphone is properly plugged in.
B. Run the microphone calibration procedure.
C. Plug all microphones into the primary codec.
D. Check whether the cable from the microphone is plugged into the correct receptor on the codec.
Correct Answer: B

An engineer is deploying a Cisco Media Experience Engine 3500 to provide various capabilities for ingesting and processing video media and production capabilities. Which two advances does the Cisco MXE 3500 provide? (Choose two.)
A. automated graphical integration that can embed metadata overlays on videos during processing
B. over 2 terabytes of storage for both local and streaming media applications
C. automated ingesting of video files based on watch folders
D. clustering capability of up to 20 resource nodes to handle and balance incoming media requests and processing
E. live output abilities to provide DV, DVC Pro, DVC Pro 50, and DVC Pro HD format streams
F. ability to create VoD file outputs to WebEx ARF format
Correct Answer: AC

A technician enters the diag system normal command for a Cisco TelePresence System endpoint. Which action must be done in the CLI before entering this command?
A. Logging must be enabled.
B. Calling services must be stopped.
C. All forced upgrades must be cleared.
D. The Telephone_Srvr service must be restarted.
Correct Answer: B

Which Cisco Video Surveillance device is responsible for providing video streams to monitors after therespective layouts and views are received by the monitors?
A. Cisco IP Video Surveillance Operations Manager
B. Cisco IP Video Surveillance Virtual Matrix Viewer
C. Cisco Video Surveillance Manager
D. Cisco Video Surveillance Media Server
Correct Answer: D

In a Cisco TelePresence MX300 G2, what is the minimum bandwidth for 1080p30?
A. 768 kbps
B. 1152 kbps
C. 1472 kbps
D. 1873 kbps
E. 2560 kbps
Correct Answer: C

A customer wants to know the options that are available when using all Cisco TelePresence SX Series endpoints in a multisite conference that is hosted locally. What are three capabilities of the Cisco TelePresence SX20 endpoint during a native multisite call? (Choose three.)
A. ability to change the local layout to prominent mode
B. ability to change the layout of remote participants to prominent mode
C. ability to change the Self-View status of remote participants
D. ability to control the camera of remote participants
E. ability to change the contact status of remote participants
F. ability to change the layout of remote participants to multisite mode
Correct Answer: ABD

Refer to the exhibit.
lead4pass 210-065 dumps
Management would like to find out when a particular multipoint control unit feature was enabled and who enabled it. Which menu option is the most appropriate when searching for that information?
A. Event Display Filter
B. Audit Log
C. Event Log
D. Syslog
Correct Answer: B

Which three standards are supported for streaming live video on Cisco TCS? (Choose three.)
A. H.265
B. H.261
C. H.264
D. H.263
E. H.262
F. H.270
Correct Answer: BCD

Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two.)
A. analog to IP conversion
B. large, expandable storage space
C. physical security
D. scalability
E. faster bit rate for storage
Correct Answer: BD

Which two video endpoints can you set back to factory reset by using physical button presses? (Choose two.)
A. Cisco TelePresence C40
B. Cisco TelePresence EX90
C. Cisco TelePresence C60
D. Cisco TelePresence SX20
E. Cisco TelePresence C90
Correct Answer: BD

What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence?
A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber Video for TelePresence registers to the VCS.
B. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager, whereas Cisco Jabber registers to the VCS.
C. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has video capabilities.
D. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence has presence capabilities.
E. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They should not coexist in the same network.
Correct Answer: A

What is the proper procedure to manually reset a password on a Cisco TelePresence EX Series endpoint running software version TC7?
A. Use SSH to access the device and use the username “cisco” and the password “TANDBERG.”
B. Hold down the mute key on the touch display for 25 seconds and reset the password using the touch screen.
C. When the device is powered down, hold down the power button until the power light blinks twice, then press the power button twice.
D. Tap the power button four times within ten seconds and then use Telnet to connect to the device IP address.
E. Tap the power button five times while the device is powered off and when it boots, use Telnet to connect to the device within 60 seconds.
Correct Answer: C

Read more: https://www.lead4pass.com/210-065.html dumps real exam practice questions and answers try, lead4pass 210-065 dumps latest Cisco pdf training materials and study guides free update.

High quality Lead4pass 210-065 dumps vce youtube free try: https://youtu.be/rWZzQKxnlJQ