Tag: 300-208 exam questions

Provides a valid Cisco CCNP Security 300-208 exam dumps | 100% Free

CiscoExamPDF shares online exam exercise questions all year round! Cisco CCNP Security 300-208 exam “Implementing Cisco Secure Access Solutions (SISAS)” https://www.lead4pass.com/300-208.html (455 Q&As). Continue to study and we provide an updated cisco 300-208 exam practice questions and answers. You can practice the test online!

Watch the Cisco CCNP Security 300-208 video tutorial online

Table of Contents:

Latest Cisco CCNP Security 300-208 pdf

[PDF] Free Cisco CCNP Security 300-208 pdf dumps download from Google Drive: https://drive.google.com/open?id=10UI01zhp-OfXwCrRSDaZxZDhIUZqQqrg

300-208 SISAS – Cisco:https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/specialist-sisas.html

Cisco CCNP Security 300-208 Exam Practice Questions

QUESTION 1

Drag and drop the portals from the left onto the correct portal tasks on the right. 

Select and Place: lead4pass 300-208 exam question q1

Correct Answer:

lead4pass 300-208 exam question q1-1

Certificate provisioning = Request a certificate for a device that is unable to use onboarding support Client provisioning
= Provide a posture assessment for a device My Devices = Register a lost device Blacklist = Remove a device

 

QUESTION 2
A security engineer is deploying Cisco ISE for a company\\’s guest user services. Drag and drop the Cisco ISE persona
on the left onto its function on the right.
Select and Place:lead4pass 300-208 exam question q2

 

QUESTION 3
CORRECT TEXT
The Secure-X company has recently successfully tested the 802.1X authentication deployment using the Cisco Catalyst
switch and the Cisco ISEv1.2 appliance. Currently, each employee desktop is connected to an 802.1X enabled switch
port and is able to use the Cisco AnyConnect NAM 802.1Xsupplicantto log in and connect to the network.
Currently, a new testing requirement is to add a network printer to the Fa0/19 switch port and have it connect to the
network. The network printer does not support 802.1X supplicant. The Fa0/19 switch port is now configured to use
802.1X
authentication only.
To support this network printer, the Fa0/19 switch port configuration needs to be edited to enable the network printer to
authenticate using its MAC address. The network printer should also be on VLAN 9.
Another network security engineer responsible for managing the Cisco ISE has already per-configured all the
requirements on the Cisco ISE, including adding the network printer MAC address to the Cisco ISE endpoint database
and etc…
Your task in the simulation is to access the Cisco Catalyst Switch console then use the CLI
to:
Enable only the Cisco Catalyst Switch Fa0/19 switch port to authenticate the network printer using its MAC address
and:
Ensure that MAC address authentication processing is not delayed until 802.1Xfails
Ensure that even if MAC address authentication passes, the switch will still perform 802.1X authentication if requested
by a 802.1X supplicant
Use the required show command to verify the MAC address authentication on the Fa0/19 is successful
The switch enable password is Cisco For the purpose of the simulation, to test the network printer, assume the network
printer will be unplugged then plugged back into the Fa0/19 switch port after you have finished the required
configurations on the Fa0/19 switch port. Note: For this simulation, you will not need and do not have access to the ISE
GUI To access the switch CLI, click the Switch icon in the topology diagramlead4pass 300-208 exam question q3

Correct Answer: Review the for full configuration and solution.
Initial configuration for fa 0/19 that is already done:

lead4pass 300-208 exam question q3-1

AAA configuration has already been done for us. We need to configure mac address bypass on this port to achieve the
goal stated in the question. To do this we simply need to add this command under the interface:
mab
Then do a shut/no shut on the interface.
Verification:

lead4pass 300-208 exam question q3-2

 

QUESTION 4
Drag and drop the BYOD user experiences on an iPad on the left into the correct order on the right.
Select and Place:lead4pass 300-208 exam question q4

Correct Answer:

lead4pass 300-208 exam question q4-1

 

QUESTION 5
Drag and drop each guest user login screen from the left onto the correct description on the right.
Select and Place:lead4pass 300-208 exam question q5

Correct Answer:

lead4pass 300-208 exam question q5-1

 

QUESTION 6
Drag and drop each posture assessment outcome from the left onto the appropriate definition on the right.
Select and Place:lead4pass 300-208 exam question q6

Correct Answer:

lead4pass 300-208 exam question q6-1

Noncompliant = NAC agent determined something on the endpoint is in violation of the defined security policy
Compliant = NAC agent on the endpoint determined that the software assessment on the endpoint adheres to the
security policy Unknown = The endpoint failed to report a posture assessment to ISE.

 

QUESTION 7
CORRECT TEXT
The Secure-X company has started to tested the 802.1X authentication deployment using the Cisco Catalyst 3560-X
layer 3 switch and the Cisco ISEvl2 appliance. Each employee desktop will be connected to the 802.1X enabled switch
port and will use the Cisco AnyConnect NAM 802.1X supplicant to log in and connect to the network. Your particular
tasks in this simulation are to create a new identity source sequence named AD_internal which will first use the
Microsoft Active Directory (AD1) then use the ISE Internal User database. Once the new identity source sequence
has been configured, edit the existing DotlX authentication policy to use the new AD_internal identity source sequence.
The Microsoft Active Directory (AD1) identity store has already been successfully configured, you just need to reference
it in your configuration.lead4pass 300-208 exam question q7

In addition to the above, you are also tasked to edit the IT users authorization policy so IT users who successfully
authenticated will get the permission of the existing IT_Corp authorization profile.
Perform this simulation by accessing the ISE GUI to perform the following tasks:
Create a new identity source sequence named AD_internal to first use the Microsoft Active Directory (AD1) then use the
ISE Internal User database
Edit the existing Dot1X authentication policy to use the new AD_internal identity source sequence:
If authentication failed-reject the access request
If user is not found in AD-Drop the request without sending a response
If process failed-Drop the request without sending a response
Edit the IT users authorization policy so IT users who successfully authenticated will get the permission of the existing
IT_Corp authorization profile.
To access the ISE GUI, click the ISE icon in the topology diagram. To verify your configurations, from the ISE GUI, you
should also see the Authentication Succeeded event for the it1 user after you have successfully defined the DotlX
authentication policy to use the Microsoft Active Directory first then use the ISE Internal User Database to authenticate
the user. And in the Authentication Succeeded event, you should see the IT_Corp authorization profile being applied to
the it1 user. If your configuration is not correct and ISE can\\’t authenticate the user against the Microsoft Active
Directory, you should see the Authentication Failed event instead for the it1 user.
Note: If you make a mistake in the Identity Source Sequence configuration, please delete the Identity Source Sequence
then re-add a new one. The edit Identity Source Sequence function is not implemented in this simulation.

lead4pass 300-208 exam question q7-1 lead4pass 300-208 exam question q7-2

Correct Answer: Review the for full configuration and solution.
Step 1: create a new identity source sequence named AD_internal which will first use the Microsoft Active Directory
(AD1) then use the ISE Internal User database as shown below:

lead4pass 300-208 exam question q7-3

Step 2: Edit the existing Dot1x policy to use the newly created Identity Source:

lead4pass 300-208 exam question q7-4

Then hit Done and save.

 

QUESTION 8
Drag and drop the posture remediation actions from the left onto the correct descriptions on the right.
Select and Place:lead4pass 300-208 exam question q8

Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_011110.html#reference_F304C79D82674621A0CBAEBED45066D9

Related 300-208 Popular Exam resources

titlepdf youtube Cisco lead4pass Lead4Pass Total Questions
Cisco CCNP Security lead4pass 300-208 dumps pdf lead4pass 300-208 youtube 300-208 SISAS – Cisco https://www.lead4pass.com/300-208.html 455 Q&A
lead4pass 300-206 dumps pdf lead4pass 300-206 youtube 300-206 SENSS – Cisco https://www.lead4pass.com/300-206.html 445 Q&A
lead4pass 300-209 dumps pdf lead4pass 300-209 youtube 300-209 SIMOS – Cisco https://www.lead4pass.com/300-209.html 429 Q&A
lead4pass 300-210 dumps pdf lead4pass 300-210 youtube 300-210 SITCS – Cisco https://www.lead4pass.com/300-210.html 455 Q&A

Get Lead4Pass Coupons(12% OFF)

lead4pass coupon

What are the advantages of Lead4pass?

We have a number of Cisco, Microsoft, IBM, CompTIA and other exam experts. We update exam data throughout the year.
Top exam pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!

why lead4pass

Summarize:

The free Cisco CCNP Security 300-208 exam dumps can help you improve your skills and exam experience! To pass the cisco 300-208 exam at once: https://www.lead4pass.com/300-208.html We make Cisco 300-208 videos and 300-208 pdf for you to learn! I hope you can pass the exam easily.